pureco matte sealer
- Matte sealer is ultra flat and easy to use, giving an invisible finish over your paint finish.
- This sealer can be tinted using both ranges of our paint.
- You can also use waxes over this product if you choose.
- Apply with brush or wipe on with a damp lint free cloth.
- Perfect to use under rub on transfers, can be used as a image transfer medium as well.
- 600ml will cover 6–8 square meters depending on application technique and surface roughness.
- Water clean up
- Use 1 coat only on dark colours as the mattifying agent will give it a cloudy appearance.
- Drying Times (at 25 °C): Touch: (at 25 °C): Touch: 4 Hours.
- 600ml RRP $48 200ml RRP $24
pureco semigloss sealer
- is designed for use over any of our paints, sealing transfers and decoupage.
- The sheen is between a matte and satin sheen.
- It is easy clean, self levels for use on interiors, exteriors and water clean up.
- It can be tinted with any of our paint colours and used as a glaze.
- Will repel staining and is a fantastic product for so many uses.
- Stir with a broad stirrer, ensure your surface is dry, clean & dust free.
- Always do a test patch to see if this product is right for your project.
- Apply a single coat with a broad brush, sprayed or if easier it can be applied with a lint free damp cloth or sponge.
- No more than 2 coats should be required.
- Allow your first coat to dry thoroughly before applying your next coat.
- Coverage is 13 square metres per litre, depending on application technique and surface roughness.
- Drying Times Touch: 30 Minutes(at 25 °C) ; Recoat: 4 Hours(at 25 °C).
- Can be used for gluing down & sealing wallpaper.
- This product should not be used if air temperature is below 10 degress or above 35 degrees.
- Do not apply in direct sunlight.
- Use in a well ventilated area.
- Water clean up. 100% washable.
- 600ml RRP $48 200ml RRP $24
pureco gloss sealer
- Gloss sealer is our highest sheen level sealer.
- Stir contents thoroughly before and during use with a broad, flat stirrer, using an upward action.
- Can be brushed, rollered or wiped on. Gloss sealer is quite a sticky consistancy and water can be added to heplp application.
- If spraying add up to 10% water.
- 600ml will cover 10-12 square metres
- Apply 2 coats as required
- Drying Times (at 25 °C): Touch: (at 25 °C): Touch: 40 Minutes; Recoat: 3 Hours.
- water clean up
- Exterior/Interior use
- This product should not be used if air temperature is below 10 degress or above 35 degrees.
- Do not apply in direct sunlight.
- Use in a well ventilated area.
- Water clean up. 100% washable.
- 600ml RRP $48 200ml RRP $24