chalk finish 

Our chalk finish range is matte, velvety, self-levelling and available in 47 fabulous colours!

How To Use

• Minimal prep. Clean substrate, sand flaking paint off, lightly scuff shiny surfaces to promote adhesion. Paint, glaze or seal.
• Always do a test patch to see if this product is right for your project.
• Apply a coat with a broad brush, spray or roller.
• If spraying, thin with water as necessary. Our product can be thinned up to 30%.
• Allow your first coat to dry thoroughly before applying your next coat. 
• for a smooth finish, use a smooth flat brush in long smooth strokes, you can sand lightly in between coats for a super smooth finish also use our liquid wax with wet & dry sandpaper to finish as a sealer.
• for a textured rustic look, use criss cross brush strokes with a round or oval brush to give your piece added interest, any of our sealers can be used.
• In some cases, you may find some substrates may have tannin bleed-through. Should this happen, use our base & blocker to prevent further staining. 
• 200ml will cover approx 2-3 square metres and 600ml will cover approx 7-8 square metres in normal conditions. This will definately depend on the colour choice, whites will require more coats hence cover less square metres.
• Drying Times Touch: 30 Minutes(at 25 °C) ; Recoat: 4 Hours(at 25 °C).
• 50mls RPP $9.50,  200ml RRP $20 & 600ml RRP $40

 silk finish

• Self sealing, low sheen finish.
• Always do a test patch to see if this product is right for your project.
• Easy to clean and stain-resistant finish.
• Minimal prep is required on your projects. Brush, roller or spray.
• Clean substrate, sand flaking paint off, lightly scuff shiny surfaces to promote adhesion.
• For best results use a synthetic smooth flat brush in nice even smooth strokes.
• Sealing, waxing and top coating are not required.
• In some cases, you may find some substrates may have tannin bleed-through. Should this happen, use our base & blocker to prevent further staining. 
• 200ml will cover approx 2-3 square metres and 600ml will cover approx 7-8 square metres in normal conditions. This will definately depend on the colour choice, whites will require more coats hence cover less square metres.
• Drying Times Touch: 30 Minutes(at 25 °C) ; Recoat: 4 Hours(at 25 °C).
• Cure time 7 - 14 days. See Note below.
• Modern sleek matte to low sheen finish.
• Able to be shabbied up as you do with Chalk paints.
• Silk Finish range has a built in sealer, our sealers can certainly be used on top for extra durability, our waxes are made to be absorded into the paint surface and may just slide around and not absord into the coating with the Silk Finish range.
• Easy clean up with water for brushes, rollers and spray equipment.
• 200ml & 600ml 
• Note: Do not apply paint if the air temperature or substrate temperature is below 10 °C or above 35 °C. The temperature should not fall below 10 °C during the drying process as it will effect the adhesion of the Silk Finish and lenghthen the curing process.
• *Please note: Our Silk Finish range should be used in conjunction which our Base & Blocker as they are produced to work together. We cannot guarantee that when you using other brands of stain blockers, you will achieve optimum coverage or results with our Silk Finish range.
• 50mls RRP $9.50, 200ml RRP $20 & 600ml RRP $40