chalk finish
Our chalk finish range is matte, velvety, self-levelling and available in over 60 fabulous colours!
The perfect choice for vintage shabby chic, distressed & rustic textured looks.
How To Use
- Minimal prep. Clean substrate, sand flaking paint off, lightly scuff shiny surfaces to promote adhesion. Paint, glaze or seal.
- Always do a test patch to see if this product is right for your project.
- Apply a coat with a broad brush, spray or roller.
- If spraying, thin with water as necessary. Our product can be thinned up to 30%.
- Allow your first coat to dry thoroughly before applying your next coat.
- for a smooth finish, use a smooth flat brush in long smooth strokes, you can sand lightly in between coats for a super smooth finish also use our liquid wax with wet & dry sandpaper to finish as a sealer.
- for a textured rustic look, use criss cross brush strokes with a round or oval brush to give your piece added interest, any of our sealers can be used.
- In some cases, you may find some substrates may have tannin bleed-through. Should this happen, use our base & blocker to prevent further staining.
- 200ml will cover approx 2-3 square metres and 600ml will cover approx 7-8 square metres in normal conditions. This will definately depend on the colour choice, whites will require more coats hence cover less square metres.
- Drying Times Touch: 30 Minutes(at 25 °C) ; Recoat: 4 Hours(at 25 °C).
- 50ml RRP $9.50, 200ml RRP $22 & 600ml RRP $42